Seatpost Clamp Quick Release

Weight:  28.6mm • 34g | 29.8mm • 34.5g  |  31.8mm • 35g  |  34.9mm • 36.5g  |  36.4mm • 37g  | 38.6mm • 37.5g
Material:  6061 T6 aluminum, M5 stainless steel bolt with integrated washer
Torque spec:  6 Nm Max
Made in the USA

Recommendations

• For steel and aluminum frames apply a thin layer of grease to the inside of the clamp. For carbon frames adhere to manufacturer recommendations.
• The slot in the clamp should align with slot in frame tube. Ensure the inner lip of the clamp is fully nested onto the seat tube.
• Tighten seat post clamp bolt with QR lever in closed position with 4 mm hex wrench per manufacture frame specs.  Do not exceed 6 Nm torque.
• Once the clamp is correctly tighten simply use the lever to release and clamp for seat height adjustments.

Compatibility

Clamping Diameter:

• 28.6mm/29mm
• 29.8mm/30mm 
• 31.8mm/32mm
• 34.9mm/35mm
• 36.4mm
• 38.6mm/39mm

Frames may vary slightly from the nominal diameters due to tolerances and paint thickness. Clamps will fit on frames that are within +/- 0.5mm of specified size. For example, a 34.9mm clamp will fit frames with a seat tube measuring from 34.4mm to 35.4mm in diameter.

Clamping height: 13.5mm

Not compatible with Ibis carbon bike frames.

NOTE: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself.