Corima WS Black DX 47MM | 622x16c clincher – Front03/09/2020
Corima WS Black DX 47MM | 622x16c clincher – Pair03/09/2020
Corima WS Black DX 47MM | 622x16c clincher – Rear
Shimano Center Lock® compatible
Out of stock
Refer to the table below for the tire pressures in relation to the section marked on the tyre.
Do not remove the tire with any metal tool.
The minimum tire section is 23 mm and the maximum 32 mm.
For comfort and performance we recommend fitting 23 mm section tires on our 22.6 mm wide rims and 25 mm section tires on our 26 mm wide rims.
The original CORIMA braided rim tape is mandatory. If it is damaged it must be the replaced.
CORIMA clincher wheels are not compatible with tubeless conversion kits.
Only tires with inner tubes are acceptable (except latex inner tubes).
Co2 cartridge inflation systems are only allowed if their flow rate is adjustable. Instant inflation cartridges are prohibited with CORIMA wheels.
If the tire manufacturer indicates a pressure lower than that in the table, use this lower value.